Regulator-accessories
DirZone
DIN T piece adapter 232 Bar
Adapter for connecting two first stages on a single valve outlet
Fitting: 1x DIN G5/8 to 2x DIN G5/8
Material: Nickel plated brass
Maximum working pressure: : 232 bar
€58,00
Scuba Support
2nd stage adapter swivel
Helps establishing a perfect set angle from the regulator to the mouth, which gives comfort and helps reducing jaw ache.
Goes in-line after the second stagetrap.
Material: brass chromed.
Compatible with all second stage regulators and hoses available.
€29,95
Scuba Support
Adapter 1/2M x 3/8F UNF
- To connect standard IP hose to a 1/2" port of a Mares 1st stage
€14,95
DirZone
OPV - Over pressure valve for 1st stage
Allows gas to be vented in case the first stage of an Argon bottle fails and high pressure goes through the pressure ports.
Fitting: To low pressure port 3/8 UNF.
€17,95
XS Scuba
2nd Stage Quick Disconnect
Add a quick-disconnect to almost any regulator or full face mask.
Installs between low pressure regulator hose and second stage
Lock-down screw to prevent accidental disconnection
Maximum 200 psi
€69,00
DirZone
Deluxe Over pressure Valve OPV adjustable
- For argon set or rebreather
- Fits direct on first stage
- Adjustable OPV
- Fits direct on first stage
- Adjustable OPV
€49,00
ISC
Inflator Adapter Seaquest female to Balanced Power Inflator (BPI)
Adapter to connect Cejn inflator hose (commercial diving connection) to a standard inflator connection.
€29,95
XS Scuba
Inflator adapter to 3/8"female
With the adapter you can connect a medium pressure hose of a 2nd stage to an inflator hose.
€14,95
Apeks
Apeks blind plug 3/8 UNF
- Port plug for the first stage
- For closing medium pressure ports
- For closing medium pressure ports
€14,95
Trident
Trident Magnetic Octopus Holder
The Trident Magnet holder is a very easy tool to hang your octopus or console. The octopus and console hangs but is still easy to release. Use only with a console without a compass.
€17,95
Divesoft
TIGHT SCREW CAP M26X2
Tight screw cap for the first stage of automatics, connection M26x2. It prevents the first stage connector from being contaminated by water while being washed in fresh water or from contact with wet objects on a boat.
€8,95
Beaver
1st Stage 90 Degree LP Hose Double T-Adapter 3/8" UNF
The Beaver 1st Stage 90 grips LP hose Double T adapter gives you the option to turn a single port into two, it also changes the angle of your ...
€39,40
Showing 1 - 24 of 52