Regulator-accessories

Adapter for connecting two first stages on a single valve outlet Fitting: 1x DIN G5/8 to 2x DIN G5/8 Material: Nickel plated brass Maximum working pressure: : 232 bar

ScubaSupport Droogpakreparatie en servicetools

Helps establishing a perfect set angle from the regulator to the mouth, which gives comfort and helps reducing jaw ache. Goes in-line after the second stagetrap. Material: brass chromed. Compatible with all second stage regulators and hoses available.

- To connect standard IP hose to a 1/2" port of a Mares 1st stage

ScubaSupport Droogpakreparatie en servicetools

Allows gas to be vented in case the first stage of an Argon bottle fails and high pressure goes through the pressure ports. Fitting: To low pressure port 3/8 UNF.

Add a quick-disconnect to almost any regulator or full face mask. Installs between low pressure regulator hose and second stage Lock-down screw to prevent accidental disconnection Maximum 200 psi

- For argon set or rebreather
- Fits direct on first stage
- Adjustable OPV

Adapter to connect Cejn inflator hose (commercial diving connection) to a standard inflator connection.

For argon set or rebreather Fits direct on first stage

Goes in-line after the second stagetrap

With the adapter you can connect a medium pressure hose of a 2nd stage to an inflator hose.

- Port plug for the first stage
- For closing medium pressure ports

The Trident Magnet holder is a very easy tool to hang your octopus or console. The octopus and console hangs but is still easy to release. Use only with a console without a compass.

Tight screw cap for the first stage of automatics, connection M26x2. It prevents the first stage connector from being contaminated by water while being washed in fresh water or from contact with wet objects on a boat.

The Beaver 1st Stage 90 grips LP hose Double T adapter gives you the option to turn a single port into two, it also changes the angle of your ...